Studio Installation

The ci30 is the smallest of the range, perfect for in-ceiling, in-wall or on-wall mounting. It out-performs speakers twice its size, making it ideal for surround channels, Dolby Atmos® and stereo in smaller rooms.

The ci45 is suited to larger spaces; it has all the speed and attack of the ci30, and produces greater image depth, bass extension and dynamism.

With a second LT™ (long-throw) bass driver, the ci65 creates more slam and presence, with more headroom and bass extension. It’s ideal for use as a surround speaker in medium-to-large theatres.

The ci90slim offers the same performance as the ci30 and ci45 in a long, slim cabinet. It is the retrofit option, fitting between standard studwork.

The ci140 is the ultimate in on-wall home theatre loudspeaker design. With a complement of four 5” LTX™ long-throw woofers & the Laminair-enhanced Advanced Transmission Line.

Employing the same four bass drive units used in the ci140 and operating with the ATL, the sub reproduces additional low-frequency energy, perfect for home theatre installations.

The wafer 1™ is the more compact of the two models in the range, best suited to installations where a discreet and elegant look is all-important, but quality of audio reproduction remains paramount.

The new wafer-iw™ series of in-wall loudspeakers, expands the range of cutting-edge products ideally suited to the discerning listener and the perfect match for all contemporary installations.

The wafer 2™ follows the identical design cues and contains the same intelligent innovations as the wafer 1™The depth of the cabinet remains ultra slim line with small increases to the height and width.

The new wafer-iw™ series of in-wall loudspeakers, expands the range of cutting-edge products ideally suited to the discerning listener and the perfect match for all contemporary installations.

The three-way IB2S-AII offers discerning users all the attributes of PMC’s large ATL™ reference active monitors but in a more compact form

The IB1S is an extremely flexible 3-way monitor, which has found its home in the most varied of environments.

The IB2S is based on the hugely successful IB1S with one major change to the driver compliment. The addition of the PMC 75 large soft dome mid range unit.

The MB2S is perfect for mid sized control rooms either soffit mounted or on its custom studio stands. The MB2S allows higher SPL’s without distortion and loss of definition normally associated with a device of its size.

Whether mounted in soffits or on stands, the MB3, with its distinctive 12-inch Radial™ bass driver is ideal for medium-sized recording, mixing, mastering, outside broadcast or as rear surround speakers.

If you are looking for monitoring that combines phenomenal resolution with greater LF headroom, then the twin cabinet IB2S XBD-AII is the perfect solution.

The MB2S XBD is a development of the successful MB2S with increased dynamics and LF performance.

Featuring a second cabinet devoted exclusively to bass, with an additional single 12-inch Radial bass driver, the twin-cabinet MB3 XBD-A system offers still better dynamics than the MB3.

Building on the unique heritage and 25-year success of PMC’s BB5, the BB6 offers the same wide dynamic range and frequency response & 15-inch Radial™ bass driver.

The BB6 XBD-A takes distortion to new lows and pushes the maximum SPL to a powerful 131dB

Introducing the QB1-A - PMC’s newest large-scale reference studio monitor.

The QB1-XBD-A is a statement monitor that has no equal in terms of sheer power and resolution.