PMC has extended its range of compact self-powered monitors with the ‘activated’ IB1S-A midfield and SB100-A subwoofer, which add 200W of amplification to the passive IB1S and SB100.

The new activated monitors may be purchased off-the-shelf or by retrofitting a compact power module to the existing IB1S and SB100 speakers.

The new IB1S-A and SB100-A models add PMC's 200W DS-001 Class D power amp to the rear plate of the monitors, housed in the new vented DS-MODULE-001. The result is a monitor that offers engineers and producers the controlled handling and sheer power of active models, but in a compact, plug-and-play package that does away with the need for inconvenient cabling and physically separate power amps that take up more rack space. Designed for PMC's target market of 'highly critical professionals in medium-sized control rooms', the new activated monitors are aimed at recording, broadcast, and film and video post-production/mastering applications. The activated models will be of particular benefit in smaller studios and in Outside Broadcast vehicles, where rack space is at a premium.

Current users of passive IB1S/SB100 combinations needn't lose out as a result of this new launch. The DS-MODULE-001 may be purchased separately and retrofitted in a matter of minutes to the passive monitors and/or subwoofer by means of six bolts on the monitors' existing back panels — and retrofitted IB1S-As and SB100-As have exactly the same performance and specification as off-the-shelf models. The DS-MODULE-001 may be added to horizontally or vertically orientated speakers, allowing for maximum flexibility and ease of use with all monitors in surround arrays, including centre-channel speakers and subwoofers. The activated models are available in 100-115V or 230V versions, and audio input is via professional XLR connectors, with outputs on Neutrik® SpeakON NL4s or 4mm banana plugs.

Sensitivity: 89dB 1W 1m Effective ATL™ Length: 2.4m 8ft Impedance: 4 Ohm nominal Drive Units:
LF 240mm, 100mm voice coil
HF 27mm soft dome
Crossover Frequency:
380Hz & 3.8kHz
Input Connectors:
3 Pairs 4mm Sockets(Tri-wire or Tri-Amp)
Dimensions:

H 740mm 29.1″ W 330mm 13.0″ D 465mm 18.3″

Weight: 46.5kg 102.3lbs Available Finishes: available finish
available finish
"Excellent Product "
Mr S, Pune
"Pure Bliss "
Mr P, Old Greenwich

Downloads

Brochure(s)

Guide(s)

Drawing(s)

Customer Reviews

"Excellent Product "
Mr S, Pune
"Pure Bliss "
Mr P, Old Greenwich

Technology

ATL Tecnology

DEEPER, CLEARER, CLEANER BASS & MORE

• Greater detail & more natural
• A full, rich sound at any volume level
• Deeper bass from a smaller cabinet

The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world.

ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes.

find out more

ATL Tecnology